2 x 1/2 in. 70/30 Copper Nickel Concentric Reducer. CL200 Rating, Bell end Connection MSS-SP-119
Item No. M111363
Loading
Bell End fittings are a type of pipe fitting used in joining pipes. Unlike butt weld fittings, bell end fittings are flared on at least one end to create a larger connection diameter. The flared end fits over the end of the adjacent pipe, where the joint is then welded together. Bell end fittings ar
Have
multiple lines that you'd like to Request for Quote? You can upload your list here (login
required) or contact a Marine Valve Expert directly.Â
Description
Bell End fittings are a type of pipe fitting used in joining pipes. Unlike butt weld fittings, bell end fittings are flared on at least one end to create a larger connection diameter. The flared end fits over the end of the adjacent pipe, where the joint is then welded together. Bell end fittings are used in water, sewer, and marine applications where they enable efficient assembly of pipeline networks. Bell end fittings are faster to install than Butt Weld. This 2 x 1/2 in. Concentric Reducer is made from 70/30 Copper Nickel. It has a pressure rating of CL200 with a Bell end connection conforming to MSS-SP-119.
Specifications
- Type
- Concentric Reducer
- Size
- 2 x 1/2 in.
- Pressure Class
- CL200
- Material
- Copper Nickel
- Material Grade
- 70/30 Copper Nickel
- Manufacturer
- Generic
- Mil-Spec #
- MSS-SP-119
- Market
- Navy
- Connection
- Bell end
- Full Specifications
- 2 x 1/2 in. Concentric Reducer Pipe Fitting 70/30 Copper-Nickel Alloy (Cu-Ni) Copper Nickel Bell End End Concentric Reducer M Stainless Steel Sp-119
Reviews (0)
There are no reviews yet.
Loading
*Images shown may not reflect the actual product and may show a similar product of a different size, manufacturer, etc.
2 x 1/2 in. 70/30 Copper Nickel Concentric Reducer. CL200 Rating, Bell end Connection MSS-SP-119
Item No. M111363
Description
Bell End fittings are a type of pipe fitting used in joining pipes. Unlike butt weld fittings, bell end fittings are flared on at least one end to create a larger connection diameter. The flared end fits over the end of the adjacent pipe, where the joint is then welded together. Bell end fittings are used in water, sewer, and marine applications where they enable efficient assembly of pipeline networks. Bell end fittings are faster to install than Butt Weld. This 2 x 1/2 in. Concentric Reducer is made from 70/30 Copper Nickel. It has a pressure rating of CL200 with a Bell end connection conforming to MSS-SP-119.
Have
multiple lines that you'd like to Request for Quote? You can upload your list here (login
required) or contact a Marine Valve Expert directly.Â
Specifications
- Type
- Concentric Reducer
- Size
- 2 x 1/2 in.
- Pressure Class
- CL200
- Material
- Copper Nickel
- Material Grade
- 70/30 Copper Nickel
- Manufacturer
- Generic
- Mil-Spec #
- MSS-SP-119
- Market
- Navy
- Connection
- Bell end
- Full Specifications
- 2 x 1/2 in. Concentric Reducer Pipe Fitting 70/30 Copper-Nickel Alloy (Cu-Ni) Copper Nickel Bell End End Concentric Reducer M Stainless Steel Sp-119
***All trademarked and copyrighted materials, including logos, are the sole property of their respective owners. This product is not affiliated with, endorsed by, or sponsored by these owners. References to third-party trademarks or copyrights are for informational purposes only, without implying any association or endorsement. We respect intellectual property rights. Any concerns should be promptly addressed. While efforts have been made for accuracy, errors may occur. Claims, warranties, and liabilities related to third-party trademarks or copyrighted materials rest with the product manufacturer or seller. By using this product, you agree to these terms. If you disagree, please refrain from using the product.