Top of the page

3 in. Carbon Steel, Cast Swing Check Valve. Class 300 Rating, Butt weld Connection 8 (CR13/HF) Trim. ANSI B1634

Item No. M100641
Swing Check Valves allow fluid to flow in only one direction, using a flapper or swinging disc that opens to enable forward flow and closes against reverse flow. This 3 in. Swing Check Valve is made from Carbon Steel, Cast with TRIM 8 (CR13/HF) trim. It has a pressure rating of Class 300 with a Butt
Have multiple lines that you'd like to Request for Quote?  You can upload your list here (login required) or contact a Marine Valve Expert directly. 

Description

Swing Check Valves allow fluid to flow in only one direction, using a flapper or swinging disc that opens to enable forward flow and closes against reverse flow. This 3 in. Swing Check Valve is made from Carbon Steel, Cast with TRIM 8 (CR13/HF) trim. It has a pressure rating of Class 300 with a Butt weld connection conforming to ANSI B16.34.

Specifications

Type
Swing Check Valve
Size
3 in.
Pressure Class
Class 300
Material
Steel
Material Grade
Carbon Steel, Cast
Manufacturer
Generic
Mil-Spec #
ANSI B16.34
Market
Commercial
Connection
Butt weld
Trim
TRIM 8 (CR13/HF)
Full Specifications
3-inch Swing Check Valve. Cast Steel Class 300 Butt Weld, Trim 8 (Cr13/Hf)

Reviews (0)

There are no reviews yet.

*Images shown may not reflect the actual product and may show a similar product of a different size, manufacturer, etc.

3 in. Carbon Steel, Cast Swing Check Valve. Class 300 Rating, Butt weld Connection 8 (CR13/HF) Trim. ANSI B1634

Item No. M100641

Description

Swing Check Valves allow fluid to flow in only one direction, using a flapper or swinging disc that opens to enable forward flow and closes against reverse flow. This 3 in. Swing Check Valve is made from Carbon Steel, Cast with TRIM 8 (CR13/HF) trim. It has a pressure rating of Class 300 with a Butt weld connection conforming to ANSI B16.34.

Specifications

Type
Swing Check Valve
Size
3 in.
Pressure Class
Class 300
Material
Steel
Material Grade
Carbon Steel, Cast
Manufacturer
Generic
Mil-Spec #
ANSI B16.34
Market
Commercial
Connection
Butt weld
Trim
TRIM 8 (CR13/HF)
Full Specifications
3-inch Swing Check Valve. Cast Steel Class 300 Butt Weld, Trim 8 (Cr13/Hf)
Tork Systems
***All trademarked and copyrighted materials, including logos, are the sole property of their respective owners. This product is not affiliated with, endorsed by, or sponsored by these owners. References to third-party trademarks or copyrights are for informational purposes only, without implying any association or endorsement. We respect intellectual property rights. Any concerns should be promptly addressed. While efforts have been made for accuracy, errors may occur. Claims, warranties, and liabilities related to third-party trademarks or copyrighted materials rest with the product manufacturer or seller. By using this product, you agree to these terms. If you disagree, please refrain from using the product.
***All trademarked and copyrighted materials, including logos, are the sole property of their respective owners. This product is not affiliated with, endorsed by, or sponsored by these owners. References to third-party trademarks or copyrights are for informational purposes only, without implying any association or endorsement. We respect intellectual property rights. Any concerns should be promptly addressed. While efforts have been made for accuracy, errors may occur. Claims, warranties, and liabilities related to third-party trademarks or copyrighted materials rest with the product manufacturer or seller. By using this product, you agree to these terms. If you disagree, please refrain from using the product.
© Copyright 2024 Tork Systems, Inc. All rights reserved. 
Tork Systems, Inc.
Phone: +1 (800) 867-5514

2900 Main St., Bldg 140D

Alameda, CA 94501

© Copyright 2024 Tork Systems, Inc. All rights reserved.Â